stress distribution
英 [stres ˌdɪstrɪˈbjuːʃn]
美 [stres ˌdɪstrɪˈbjuːʃn]
网络 应力分布; 力分布; 应力分布图; 应力分散
双语例句
- The stress distribution, residual stress distribution, the optimum elasto-plastic radius and optimum autofrettage pressure have been obtained by the analysis.
并根据厚壁球壳的安定性条件和合成应力分布分析得出了最佳弹塑性半径和最佳自增强内压的统一解析解。 - Objective: To investigate the role of dental collar and post length in determining the stress distribution indentin.
目的：将桩长与牙本质领结合起来进行研究，揭示二者对牙体应力的影响。 - The analysis shows that the lower friction coefficient, the more uniform stress distribution;
分析表明，摩擦系数越小，吊绳的应力分布越均匀； - After calculation and analysis, the stress distribution rule and fatigue influence factors for hub under different load cases have been found.
通过计算分析，找到了轮毂在各种工况下的应力分布规律和疲劳影响因素。 - Effect of Notch Parameters of Round Shaft on Stress Distribution under Torsion
扭转载荷下缺口参数对圆轴应力分布的影响 - Objective To study the stress distribution in PDL responding to horizontal forces with different periodontal bone loss models.
目的研究牙周支持骨高度对水平向牙合力应力分布的影响规律。 - Numerical Analysis of Dynamic Response and Axial Stress Distribution of Rock Bolts Under Explosive Loads
锚杆动载响应和轴向应力分布规律数值分析 - We defined the conditions of the plane stress distribution of thin plates subjected to in-plane forces.
我们定义了承受平面力的薄板平面应力分布条件。 - The effect of thermal property on the stress distribution in solar panel in thermal field is studied analytically.
文章利用解析法研究了材料热膨胀系数对温度场中太阳电池板最大应力的影响。 - The stress reduction ratio and the vertical stress distribution in the embankment fill were studied in detail.
根据试验结果，分析了应力折减系数大小和填土中的竖向应力分布特点。 - First, a finite element model of clutch driven plate assembly was built, the stiffness and stress distribution were calculated;
根据离合器从动盘的工作原理建立了结构的有限元模型，计算了从动盘结构的刚度和应力分布； - When the bond is destroyed the shear stress distribution on the bolt side can be expressed by parabolic curve.
而对于锚杆与砂浆的粘结遭到破坏的区段，采用抛物线来拟合。 - The width and depth of laser transformation hardening zone and residual stress distribution were measured experimentally.
实测了激光相变硬化区的宽度和深度及残余应力分布。 - Manufacture method of anchor bolt plate is introduced and stress distribution in laboratory is analyzed in this paper.
介绍了锚杆测力托盘的制作方法，在实验室对锚杆托盘的应力分布进行了分析。 - The horizontal well stress distribution and the rock failure criterion constitute a fracture initiation mathematical model, which was solved by the iteration method.
水平井井筒应力分布和岩石破坏准则构成了水平井压裂裂缝起裂数学模型，利用迭代法对模型进行了求解。 - The model of cutting process is established based on the rigid-plastic FEM, and the transient stress distribution of cutting tool in cutting process is obtained through the simulation.
基于刚塑性有限元方法建立了切削加工过程仿真模型，通过模拟获得了切削加工过程中刀具应力的分布和变化情况。 - The temperature and stress distribution of the slab medium are given for the ideal ease.
给了理想情况下的板条介质温度和应力分布。 - Objective: To investigate the influence of ball or bar attachments on stress distribution of the mandibular implant-supported overdenture.
目的：探讨球形、式附着体对全下颌种植覆盖义齿应力分布的影响。 - The stress distribution of the, gearbox was obtained through finite element analysis and was compared with the experimental data.
通过有限元分析得到了该机匣的应力分布，并与试验值进行了对比。 - The thermal stress distribution of SCSP in packaging process was studied by finite element method.
利用有限元法研究了堆叠芯片封装（SCSP）器件在封装工艺过程中的热应力分布。 - A Study on Temperature and Thermal Stress Distribution of Slab Laser in Heat Capacity Operation
热容型板条激光器介质温度和热应力研究 - Geogrid reinforcement can improve maximal compressive stress distribution, and decrease shear stress on the surface of soil foundation.
土工格栅加筋改善地基表面的最大压应力分布，减小传递到地基表面的剪应力； - The steel ball bearings, roller contact modeling and simulation analysis are carried out, the contact pressure and state of stress distribution are obtained.
通过对钢丝滚道球轴承点接触问题进行建模与仿真分析，得到接触压力和各向应力分布的状态。 - At the same time, the formula of the frozen pressure on the outer shaft lining and the corresponding expressions of stress distribution are also derived.
导出了作用于冻结壁上的外荷载表达式和冻结壁的应力分布规律以及作用于外层井壁上的冻结压力解析式和井壁的应力分布规律。 - The stress distribution of bioprosthetic heart valve leaflets affected by the material of frame, material of leaflets and calcification is analyzed by using finite element method.
应用有限元方法分析了瓣架的材料特性、瓣叶的材料特性和瓣叶的钙化等因素对瓣叶的应力分布的影响。 - And has carried on the comparison to three kind of tube plates stress distribution situations, has provided the certain reference for the industry boiler tube plate design calculation.
并对三种管板的应力分布情况进行了比较，为工业锅炉管板的设计计算提供了一定的参考依据。 - A numerical simulation was performed to calculate temperature and stress distribution in K9 glass sample irradiated by pulse CO2 laser using finite element method.
利用有限元法对脉冲CO2激光辐照K9玻璃样品中的温度和应力分布进行了数值分析。 - Wall rock stress distribution of tunnel in soft rock is researched by means of similar material model test in this paper.
采用相似材料模型试验方法，对软岩隧道在以竖直地应力为主和水平地应力为主两种情况下围岩压力分布规律进行了研究。 - Objective To redevelop the finite element model libraries and to analyse the stress distribution of telescopic crown dentures.
目的二次开发有限元模型库，尝试该建模方法对套筒冠义齿进行力学分析的可行性。